Payment & Shipping Terms:
|Name:||Magnetic GPS Tracker||Color:||Black|
|Antenna Type:||GSM||Communication Frequency:||850/900/1800/1900Mhz|
AGPS LBS WIFI Magnetic GPS Tracker With Multiple Positioning Mode
Before using the locator, please read this User Manual carefully so as to install it correctly and use it quickly. The picture is for reference only and the actual product should prevail.
Preparation before use
Check whether the device model is correct and whether the accessories are all in readiness.
Select the SIM card of the GSM network by referring to the advice of your distributor. (Turn off the cell phone first before installing the SIM card)
The GPRS function and the caller ID display function should be subscribed for the SIM card.
Install the APP client onto your cell phone. Please consult your distributor about the detailed information on the APP client.
Multiple Positioning Mode: GPS+ AGPS+LBS+WIFI
Worldwide GSM+GPRS 4-frequency System: 850/900/1800/1900MHz
Automatic Time Update: Precise GPS time service and no manual time adjustment is needed
Track: The user's specific location can be inquired through the cell phone APP or the computer
Fence: Designate an area on the map by setting the device as the center point and the alarm will be triggered off immediately once the user of the device goes into or out of this area
PlayBack: Inquire the moving routes of the device in the past 3 months anytime and anywhere
SOS: In case of emergency, press the SOS button and the device will send out the call and message for help to the guardian
Walk: Counts the steps the user has walked
Reward: The reward is sent out through the APP on the guardian's cell phone and the reward progress can be viewed
Find Device: The lost device can be found through the APP on the cell phone
Alarm: The alarm can set through the APP on the guardian's cell phone
Anti-disturbance mode: Once the no-disturbance time range is set through the APP on the guardian's cell phone, the device will shield the voice messages and calls
Voice: With the highly sensitive microphone, the sound around the device can be heard in real time in case the emergency happens to the user
Remote Power-off: The device can be turned off through the APP on the guardian's cell phone
Remote Restart: The device can be restarted through the APP on the guardian's cell phone
Intelligent Power Saving: The device turns off/on the GPS and data upload in the time range specified through the APP on the guardian's cell phone
Communication Frequency: 850/900/1800/1900Mhz
Charging Input: AC 110-220V 50/60HZ
Charging Output: DC 5V 500mA
GPS positioning accuracy: 5-7 days
Related operation instructions of the equipment
a. Press and hold the button for 3 seconds to turn on the device; if there is no SIM card installed, press and hold the button for 3 seconds to turn off the device; after the SIM card is installed, press and hold the button for 9 seconds to turn off the device.
b. After the SIM card is installed and the device is under the standby status, press and hold the button for 3 seconds to allow the device to set off the SOS emergency alarm.
c. When the call from the related telephone number comes in, press the button briefly to answer the call and press it again briefly to hang up.
d. When the clock rings up, press the button briefly to stop the ring.
Red LED: It keeps lighting up during the charging, flashes quickly during the lower battery, flashes slowly during normal electric quantity and goes out completely during the standby.
Yellow LED: It is for detecting the signal of the SIM card of the device; it flashes slowly under normal signal condition and flashes quickly when there is no signal.
Blue LED: It means the device can receive the GPS signal; it flashes slowly under normal signal condition and flashes quickly when there is no signal.
SOS emergency alarm of the device
After the SIM card is installed and the device is under the standby status, press the SOS button for 3 seconds and the device will dial 3 supervising telephone numbers in turn for one time each. During which, if the call is answered, the dialing will not be continued; if not, it will be continued till one round of dialing is finished. Meanwhile, the alarm notice will be sent to the APP.
Text the message "pwrst" to the device number to restore the password to the default one. And the device will reply: "The password has been cleared successfully".
Restore to the factory settings
Text the message "1122" to the device number and the device will restart automatically and reply: "The factory settings have been restored to successfully".
Modify the time interval of the positioning upload
Text the message "time#+number" (time#1 can be set to 1-60 minutes) to the device number and the device will reply with the message "time#+number".
When the device is turned on for the first time, it cannot be connected to the server and the APP sends the command that shows the device is not connected to the network yet. Please check:
5.1 Whether the SIM card has been inserted into the device correctly.
5.2 Whether the SIM card inside the device supports the GSM network; for example, it does not support the China Telecom network.
5.3 Whether the data traffic service of the SIM card inside the device has been subscribed; it must support the data traffic of the 2G network and the device can use only the data traffic of the 2G network currently.
5.4 Whether the IMEI is correct; it must ensure that the IMEI bar code adhered to the device is consistent with the IMEI that is written into the device before it leaves the factory.
Contact Person: sales